The Rhino Rack part numbers # RRVA118B-2, # RRRLKVA, and # DK394 is a fit for your 2012 Lexus CT 200h and would be a great option. This is the best quality rack for the price.
The rack has a 165 lb capacity but you would need to check the owners manual of your vehicle to determine it's capacity as well. view full answer...
The Curt Cam Buckle Stabilizing Strap # 18050 is 61 inches from the top of the hook to the end of the strap.
I attached a picture below. view full answer...
The Konig Self-Tensioning, Low-Profile Snow Tire Chains - Diamond Pattern - D Link - CG9 - Size 095 # TH00023095 is only confirmed to fit the following tire sizes.
195/75-15
205/60-16
205/70-15
215/40-18
215/50-17
215/55-16
215/65-15
225/45-17
225/50-16
225/60-15
235/55-15
235/60-14
For 215/45R17 tires you would instead need the Konig Self-Tensioning, Low-Profile Snow Tire Chains - Diamond Pattern - D Link - CG9 - Size 090 # TH00023090. view full answer...
We have some lightweight bike racks like the Saris Bones part # SA805BL (10 lbs), which could potentially work for you. But without knowing what year Lexus CT 200h you have it is hard for me to say what would be the best rack for based on what is confirmed as a fit.
What you will want to do is follow the link I attached that will ask you to enter your year/make/model and then all of the confirmed trunk racks we offer will be listed for your vehicle. view full answer...
For your 2015 Lexus CT 200h we have the Curt hitch part # C11200 which is a 1-1/4 inch sized hitch opening. 2 inch hitches are reserved for larger vehicles with higher towing capacities like trucks and SUVs. You would have to purchase an additional bike rack that is compatible to carry bikes with this vehicle.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most... view full answer...
The Kuat Sherpa 2.0 # SH12P is a great bike rack, however there is no way to adjust the rack to fold up closer to your bumper. The only solution would be to use a different hitch that doesn't stick out as far from your vehicle frame, but the only hitch we have available for your 2018 Lexus CT 200h is the Curt Trailer Hitch Receiver # C11200. When installed, this hitch should measure about 4" from the center of the hitch pin hole to the rear-most part of your bumper.
Otherwise, you would... view full answer...
My top recommendation for a 3-bike trunk-mount rack for your 2014 Lexus CT 200h is easy: the Thule OutWay 3, part # TH56BV.
This thoroughly-engineered carrier includes locks for both your bikes and for the rack itself, uses a superior 2-cable attachment system and includes Thule's patented Fit-Dial mounting system for easy installation. It is built to last, made in the USA and backed by Thule's limited lifetime warranty. Few companies stand behind their products the way Thule consistently... view full answer...
If you don't feel comfortable doing this yourself, we recommend taking it to any mechanic you trust. This is not a specialized installation, so you can take it to any shop to have the product installed. We don't have installers we specifically refer to, so having a person or company you trust do the work is my recommendation.
The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11141915 is an easy installation on your 2015 Lexus CT200h. The connections... view full answer...
For your 2017 Lexus CT 200h, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11200 will have a 4 inch measurement from the hitch pin hole to the outermost part of your bumper just like you can see in the attached video of a 2013 model. This will help you determine the best fit for accessories like a bike rack, cargo carrier, or ball mount.
As long as the measurement of your bike rack from folded position to hitch pin hole exceeds the 4 inches you will be good to go.... view full answer...
Hey Michelle, the Hollywood Racks Destination bike rack part # HLY94FR that you referenced is a really great bike rack that is compatible with Class I hitches like the Curt part # C11200 that you have installed on your 2011 Lexus CT 200H. It's very lightweight, easy to use, and also stable on the road too at a great price. view full answer...
We have several trunk mount bike rack options for the 2013 Lexus CT 200h. I have included a link to them for you to view. The least expensive 2 bike rack is the Thule Passage 2, # TH910XT. And the least expensive 3 bike rack is the Thule Passage 3, # TH911XT.
I have included some informational links on these bike racks for you to view. If you will be carrying womens, childrens, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT for greater ground clearance and... view full answer...
We have several tire chain choices available for the 2012 Lexus CT200h.
Assuming that your vehicle has size 215/45-17 tires, you can click the provided link to see the available choices. If you have a different tire size, you can use the fit guide link I provided.
The right chain for you will depend on how they are going to be used. If you are planning on keeping them in the trunk of your vehicle just in case you find yourself in an emergency situation, but are not planning on using them... view full answer...
If your 2012 Lexus CT 200h has the kind of sunroof that goes into a cavity inside the roof and no part of it sticks up, then it will not interfere with a roof rack like Rhino-Rack Roof Rack System with Vortex Aero Crossbars, # RRVA118B-2, # RRRLKVA, # DK394, which you referenced.
If it slides up and back it is more likely to interfere with the sunroof. I don't recommend opening the sunroof with a roof rack installed or with anything loaded on it. Even though the bars are aerodynamic it... view full answer...
We have what you need to install Curt Class I hitch # C11200 on your 2013 Lexus CT 200h.
Written instructions and a complete install video are both linked for you. The instructions give you a complete list of the tools needed as well as torque specs and the video walks you through the install process. I also included a helpful article with hitch installation tips.
For a complete replacement hardware kit you can use part # RHK. On that item's page simply select/enter the brand and part... view full answer...
Based on some quick research it appears your Atera Stada DL is a fit for a 50mm hitch ball more common in Europe. We do have the Brophy 50mm Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 8K # EH53C-C. The 50mm hitch ball is 1.9685 inches so it is between the 2 inch ball and the 1-7/8 inch size so that is most likely your fit issue. view full answer...
Since the bars on the Rhino Rack ROC25 # RR65QR are 37-3/8" long, you'll want to use the Rhino-Rack Fairing for Roof Racks - 38" Long # RRRF2, which will sit right about even with the outside of the legs and provide you with full coverage of your crossbars. This is going to do a great job of reducing the wind noise and is exactly what you're looking for. view full answer...
Curt Trailer Hitch, # C11200, is a confirmed fit for the 2013 Lexus CT200h. You will want to check the owner's manual for your specific vehicle before adding a trailer hitch and any accessories.
If you want a hitch bike rack, we have a few dozen class I-compatible racks to choose from, click the provided link to see them. To maintain the hitch warranty, Curt requires the use of a stabilization strap like part # 18050 on any non trailer load carried by the hitch.
The Thule Helium Aero... view full answer...
Thule has tested the OutWay trunk mount bike carrier # TH45JV on a 2012 Lexus CT 200h. Probably not for 1200 miles but enough to determine that it fits safely. This is a good road trip bike carrier. It features anti-sway cradles, passive security strap, and an integrated cable lock in the last bike position. The 2-strap design will keep the carrier secure to the vehicle and the anti-sway cradles will reduce bike movement. It is the easiest rack to install and remove. It is an excellent... view full answer...
According to our friends at Thule, the OutWay 2 Bike Trunk Mounted Rack you referred to, part # TH45JV would indeed fit your Lexus CT200h. The OutWay uses an innovative retracting cable system to attach to the vehicle, rather than the difficult to use strap and buckle system used by other trunk mounted racks.
If you'll be transporting women's bikes or bikes with sharply-angled top tubes, you might also consider a frame adapter bar like part # 64005. The bar spans the distance between the... view full answer...
I think I have a solution to your problem. I would recommend you use a bike adapter bar like the Thule Bike Adapter Bar for Womens and Alternative Bike Frames, part # TH982XT.
A bike adapter bar is specifically designed to help you carry bikes that have odd or smaller shaped frames safely on a bike rack. The adapter bar will attach to your bikes seat post and the handle bar post.
I have attached a video showing how this adapter bar works for you to check out. view full answer...
Go To Results